Service Fuse - Westinghouse WLE522WA User Manual

INSTALLATION
Replacing the oven door
(to be done by qualified personnel only)
1� Hold door with both hands�
2� Locate both hinges into the frame slots at the
personnel only)
same time�
Frame slot
Hinge
Notch
1. Hold door with both
3� Ensure that the location notch drops into frame
hands and locate both
slot� Care should be taken not to damage other
hinges into the frame slots
parts of the cooker�
at the same time.
Frame slot
Hinge
Frame slot
Notch
Hinge
Notch
Procedure to assemble the door (to be done by qualified personnel only).
Frame slot
Hinge
Notch
4. Open door fully and rotate stirrups away from
Notch
2. Ensure that the location notch drops into the
5. Close the door fully.
Care should be taken not to damage other
4� Open door fully and rotate stirrups away from
you back to their original position�
5� Close the door fully�
6� Carefully remove any protective plastic film to prevent
damage to the appliance�
you back to their original position.
Service fuse location – Models with power point only
frame slot.
This product is fitted with a power outlet at each end of the
parts of the cooker.
control panel�
The outlets are protected by a replaceable 15 amp fuse located
at the rear of the product�
4. Close the door fully.
WARNING
WARNING
Before servicing the fuse, ensure that all power to the product
is switched off�
To access fuse, unscrew fuse housing and remove from
appliance� (See diagram)�
Chef 540 Upright Cooker INSTALLATION 19
3. Open door fully and r
the stirrups away from yo
back to their original posi
Fuse
Fuse housing
INSTALLATION
7
23