Panasonic Toughbook CF-73 Series Operating Instructions Manual page 28

Reinstalling Software
10 At the confirmation message, press Y .
The operation of reinstallation for the hard disk starts au-
tomatically. (The operations take about 15 minutes.)
CAUTION
Do not cancel the reinstall procedure before it is
completed.
When a message appears instructing you to insert
the next CD, insert the recovery CD showing the
next number in the sequence, and then select [OK].
If the message "The media does not contain the cor-
rect file" appears, select [OK]. A message will ap-
pear instructing you to insert the next CD.
Confirm that the proper recovery CD has been in-
serted by opening the tray of the CD drive and then
close the tray, then select [OK].
11 After the reinstallation procedure completes, the follow-
ing message will appear on the display.
Remove the recovery CD.
Windows 2000
Windows(R) 2000 Professional install wizard will start after reboot.
Remove the Product Recovery CD-ROM, then restart the computer by pressing
Ctrl + Alt + Del (Delete).
Windows XP
Windows(R) XP Professional install wizard will start after reboot.
Remove the Product Recovery CD-ROM, then restart the computer by pressing
Ctrl + Alt + Del (Delete).
12 Restart the computer by pressing
Del
and immediately hold down
key when the Setup Utility starts up.
If the password has been set, enter the Supervisor Pass-
word.
13 Press F9 .
At the confirmation message, select [Yes] and then press
Enter . (The Setup Utility settings will return to their
default values. Even the security settings with the excep-
tion of the password(s) will return to their default values.)
14 Press F10 .
At the confirmation message, select [Yes] and press
Enter .
15 Perform the setup procedure for Windows by following
the instructions on the screen.
Windows 2000
Windows XP
16 Run the Setup Utility and change the settings where nec-
essary.
NOTE
When the FIRSTAID FD is to be created, follow the steps
in the readme.txt on the disk. (
28
Ctrl + Alt +
F2 . Release the
Page 12
Page 13
page 14)
<Changing the drive letter>
You can change the drive letter for the CD drive or hard disk
drive by the following steps.
Drive letters can only be changed when two or more parti-
tions have been created on the hard disk drive. The name
of the C: drive cannot be changed.
We recommend that you make these changes before in-
stalling applications.
Windows 2000
1 Select [Start] - [Settings] - [Control Panel] - [Administra-
tive Tools] - [Computer Management].
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Path...].
4 Select [Edit].
5 Select [Assign a drive letter] and select the new drive let-
ter, and then select [OK].
6 At the confirmation message, select [Yes].
Windows XP
1 Select [Start] - [Control Panel] - [Performance and Mainte-
nance] - [Administrative Tools] - [Computer Management].
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Paths...].
4 Select [Change].
5 Select [Assign the following drive letter] and select the
new drive letter, and then select [OK].
6 At the confirmation message, select [Yes].