Panasonic Toughbook CF-73 Series Operating Instructions Manual page 14

First-time Operation
Label on the top surface,
and insert the shutter-
side headfirst.
USB Floppy
Disk Drive
14
8 At [Workgroup or Computer Domain], select [No, this computer is not on a
network, or is on a network without a domain], then select [Next].
The computer will restart.
9 Enter your administrator password and select
<Only for models with touchscreen>
If the cursor can not be pointed correctly with the stylus, perform [Calibration] in
[Start] - [Control Panel] - [Other Control Panel Options] - [Touch Panel].
NOTE
If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless
LAN adaptor.] is displayed, select [Yes].
This concludes the first-time use operation guidelines.
Create Backup Disks for Reinstallation
Windows 2000
1
Select [Start] - [Programs] - [Panasonic] - [Create Backup Disk].
Windows XP
Select [Start] - [All Programs] - [Panasonic] - [Create Backup Disk].
When [You do not need to make "BACKUP DISK"] is displayed, there is no need to
create a backup disk. If this message is not displayed, create backup disks for reinstal-
lation.
To create backup disks, the USB floppy disk drive (optional: CF-VFDU03) and format-
ted 2HD floppy disks are needed.
2 Connect the USB floppy disk drive to your computer.
NOTE
The floppy disk drive must be the A drive.
3 Prepare 2HD floppy disks and make sure they are not in the write-protected state, and
then set it.
Follow the on-screen instructions.
Place a label identifying the contents on each disk.
4
Name of created backup disk
FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the
disk by following the on-screen instructions.)
CAUTION
Store the floppy disks in a safe place. They will enable you to return your computer
to the condition at the time of purchase should any problems occur.
When creating backup disks, do not run any other application program.
When creating backup disks and the message [Insufficient files to copy] is dis-
played, select [OK] and then contact Panasonic Technical Support.
While the floppy disk drive indicator is on, do not remove the floppy disk, power
off your computer or use the standby or hibernation function (
Hibernation Functions").
<When [You do not need to make "BACKUP DISK"] is not displayed (proce-
dure 1 above)>
Be sure to create the backup disk.
If a backup disk is not created, it will be impossible to return the computer to its
original state. In this case, contact Panasonic Technical Support.
.
"Standby/