Monster Power Professional PowerCenter PRO 5100 Owner's Manual page 30

Question
Will it damage a component if
plugged into a PowerCenter outlet
that's not designed for it, like
putting a high-power amplifier into
a Mixer/Preamplifier outlet?
If my PowerCenter stops operating,
what should I do?
23
FREQUENTLY ASKED QUESTIONS
Answer
No. However, as mentioned, you may not realize the full performance
potential of the component.
First check the reset button labeled BREAKER 15A on the rear panel of the
PowerCenter. It's possible an overload condition can be caused by high-powered
audio equipment. If your amplifiers draw too much power, a special circuit
breaker may be tripped. To restore operation, wait 10 minutes and press the
reset button. If power is still not restored, refer to page 20 and read through
the related troubleshooting questions.