Monster Power Professional PowerCenter PRO 5100 Owner's Manual page 26

Symptom
The PowerCenter is not providing
power to connected components.
19
TROUBLESHOOTING
Possible Cause
The component is
plugged into an outlet
programmed as SWITCHED
ON or SWITCHED ON
AFTER DELAY and the
PowerCenter has not been
turned on.
The PowerCenter is plugged
into a switched outlet on a
component that's not turned
on, so it's not getting power
and won't provide power
to the components plugged
into its outlets.
Remedy
• Press the ON/OFF button on the PowerCenter.
The components plugged into its outlets
programmed as SWITCHED ON should
turn on immediately.
• Press the ON/OFF button for the components
plugged into the PowerCenter outlets
programmed as SWITCHED ON AFTER DELAY
to turn on.
• Plug the component into an outlet
programmed as UNSWITCHED.
• Turn on the component.
NOTE: For the best possible performance,
plug the PowerCenter into a wall outlet,
not an outlet on another component.