Table of Contents
Advertisement
Quick Links
Chipper/Shredder with 2-Way Feed
Chipper/Shredder models: ECO-13
READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS
CAREFULLY SAVE THESE INSTRUCTIONS.
or go to www.betstproducts.com
When you call the help-line you will need to have the following
information:
Date of Purchase:
Location of Purchase: _______________________
Serial #:
Owner's Manual
For product questions or service,
CALL 1-541-895-3083
_______________________
_______________________
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FHM ECO-13
Summary of Contents for FHM ECO-13
- Page 1 Chipper/Shredder with 2-Way Feed Owner’s Manual Chipper/Shredder models: ECO-13 READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY SAVE THESE INSTRUCTIONS. For product questions or service, CALL 1-541-895-3083 or go to www.betstproducts.com When you call the help-line you will need to have the following...
- Page 2 This manual contains important safety instructions for Chipper/Shredders READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY SAVE THESE INSTRUCTIONS. This owner’s manual is considered a permanent part of the chipper/shredder and should remain with the chipper/shredder if resold. PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14...
-
Page 3: Table Of Contents
Missing Parts Order Form…………………………………….4 Safety Information .............. 5 Operating Guidelines ............6 Assembly................7 Important Engine Information..........8 Operating Instructions ............9 Maintenance & Storage............ 10 Troubleshooting ............... 12 Limited Warranty & Service..........13 PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... -
Page 4: Warnings
Specifications table pg 2) in the side chute. Do not deflector has been installed properly. deposit branches larger than 1/4 inches into the funnel. DO NOT force the branches into this machine, allow the machine to automatically feed through. PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... -
Page 5: Product Specifications
6. Never run an engine indoors or in a poorly ventilated people, their area. Engine exhaust contains carbon monoxide, an property, and odorless and deadly gas. themselves. Product Specifications Chipper/Shredder Model # Specifications PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... -
Page 6: Component Identification
If you are missing any parts, please complete the form on the next page and fax it back to us at:541-895-2756 PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... -
Page 7: Missing Parts Order Form
Email Serial #: Comments: IMPORTANT: Please include your receipt. Without a receipt, your order will be delayed. You may also email us at: customerservice@betstproducts.com. If emailing, please scan in your proof of purchase. PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... -
Page 8: Safety Information
Tighten gasoline cap securely. h. If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area and wait 5 minutes before starting the engine. PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... -
Page 9: Operating Guidelines
18. Do not leave this machine running while unattended for vines or long branches such as 19. Keep children, bystanders, and pets 75 feet away. Weeping Willows as they may clog the flails. 20. Use only manufacturer approved accessories/ attachments. PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... -
Page 10: Assembly
Before setting up your chipper/shredder, disconnect the spark plug wire from the spark plug and ground against the engine to prevent inadvertent starting. This step should be taken as a precaution whenever you are working on this machine. PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... -
Page 11: Important Engine Information
· Refuel in a well ventilated area with the engine stopped. · Fuel vapors are extremely flammable and may ignite after the engine has started. Make sure that any spilled fuel has been wiped up before starting the engine. PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... -
Page 12: Operating Instructions
(rope will pull slightly harder at this point). Pull rope with a rapid, continuous, full arm stroke. Keep a firm grip on starter handle. Let the rope rewind slowly. Repeat the previous PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... - Page 13 To accomplish this, remove the pins and slide the flail screen out of the discharge chute. 5. Maintain or replace safety and instruction labels, as necessary. PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14...
-
Page 14: Maintenance & Storage
Pry the belt off the pulley using a screw driver shaft as a wedge as you rotate the pulley. Place a new belt on the pulleys in a similar fashion. To tighten the tension on the pulleys, follow the above steps plus: PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... -
Page 15: Troubleshooting
Always run engine at full throttle. 1. Low engine RPM. 1. Always run engine at full throttle Rate of discharge slows 2. Chipper blade dull. 2. Replace chipper blade or see your authorized service dealer. PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... -
Page 16: Limited Warranty & Service
Parts Breakdown Rugged, Labor and Time Saving Products PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14... - Page 17 出 料 罩 焊 合 件 ECO19.016 DISCHARGE COVER ECO19.106 DISCHARGE FLAP 出 料 挡 板 出 料 压 板 ECO19.107 CLAMPING PLATE 抽 芯 铆 钉 6x12 JB4005-6x12 RIVET 6x12 螺 栓 M10x25 GB5783-M10x25 BOLT M10x25 PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14...
- Page 18 Parts Breakdown - Continued Rugged, Labor and Time Saving Products PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14...
- Page 19 ECO19.110 ENTRANCE FLAP,LOWER 下 料 斗 挡 板 下 斗 焊 合 件 ECO19.014 LOWER HOPPER 锁 紧 螺 母 M8 GB889.1-M8 LOCK NUT M8 平 垫 圈 8 GB97.1-8 PLAIN WASHER 8 PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14...
- Page 20 Parts Breakdown - Continued Rugged, Labor and Time Saving Products PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14...
- Page 21 LONG SPACER ECO19.117 FLAIL KNIFE 甩 刀 片 轴 挡 圈 16 GB893.1-16 RETAINING RING 16 键 A8x7x328 GB1096-A8x7x328 KEY A8x7x328 ECO19.113 MAIN SHAFT 主 轴 甩 刀 固 定 板 ECO19.118 PLATE PowRkraft ECO-13 Cripper / Shredder Revision 9-19-14...
- Page 22 Parts Request Form Fax to 541‐895‐2756 or E‐mail parts@betstproducts.com Name: Model Number: Address: Serial Number: City State Zip: Purchased From: Phone: Purchase Date: E‐mail: Item No. Description Price Amount Comments:...
-
Page 23: Limited Warranty
Farmer Helper Machinery Brand LIMITED WARRANTY FARMER HELPER MACHINERY CO. LTD. warrants to original Purchaser that F A R M E R H E L P E R M A C H I N E R Y C O . L T D . products are free from major defects in material under normal use and service for a period of Two (2) Years from the date the product is purchased or shipped, whichever is later. - Page 24 WARRANTY VOID IF REGISTRATION IS NOT RECEIVED OR RECORDED ONLINE WITHIN 30 DAYS OF PURCHASE DATE OR SHIP DATE, WHICHEVER IS LATER. FARMER HELPER MACHINERY REGISTRATION Item________________________________Model # _________________ Purchase Date_____/_____/_______ Purchased From: ________________________________Gifto Inv#/Order# ____________________________ Owner Name: _______________________________________ Serial # (if Applicable)______________________ Owner Address: _______________________________________ City: ________________________ County: ___________ ST: ______ Zip Code: _____________ Phone: _______________________ Email: ________________________...
- Page 25 2 YEAR EXTENDED WARRANTY & REGISTRATION Farmer Helper Machinery Branded Products 2 YEAR EXTENDED WARRANTY 2 Year Extended Warranty amends to original Recorded Manufacturers Warranty Registration the time period of described coverage. Extended Warranty does not apply to Consumable and Expendable Items as described in Product Warranty Registration. This Amendment does not affect any other part of recorded Warranty Registration or Policy.
Need help?
Do you have a question about the ECO-13 and is the answer not in the manual?
Questions and answers