Rack Mounting - Monster Power HTS 2600 Owner's Manual

Rack Mounting Your PowerCenter
This Monster PowerCenter includes two "rack ears" mounting plates for installation into a standard size equipment rack.
A) Remove your PowerCenter trim covers using a
screw counter-clockwise until the screw is completely removed.
B) Align one rack ear over the two holes on the left side of the PowerCenter. Using the Allen key, turn the two
screws clockwise until tight. Repeat this step for the right side of the PowerCenter.
C) Place the PowerCenter into the rack and align the holes with the holes of your rack. Insert rack screws (not
provided) and turn clockwise until tight.
HOOK-UP GUIDE
3 ⁄ or 2.5 mm Allen (Hex) key (not included). Turn each Allen
32
Rack Ears
15