Inserting And Removing The Battery Or Sd Memory Card (Optional) - Panasonic DMC-TZ40 Basic Operating Instructions Manual

Inserting and removing the battery or
SD memory card (optional)
Make sure that the camera is turned off.
Slide the release lever ( ) to
the [OPEN] position and open
the card/battery door
Insert the battery and card,
making sure that their
orientation is correct
• Battery: Insert the battery all the way
• Card: Insert the card all the way firmly
Close the door
Slide the release lever to the [LOCK]
position.
■
To remove
• To remove battery:
Move lever in direction of
arrow.
●
Always use genuine Panasonic batteries (DMW-BCM13E).
●
If you use other batteries, we cannot guarantee the quality of this
product.
●
Keep the Memory Card out of reach of children to prevent
swallowing.
●
We recommend using a Panasonic card.
14
VQT4S99 (ENG)
firmly and check that it is
locked by lever ( ).
until it clicks.
Lever
• To remove card:
Push the card until it clicks,
then pull the card out.
Press
[OPEN] [LOCK]
Do not touch
the terminals
on the back of
the card.
Pull out