D-Link AirPlus Xtreme G DWL-2100AP User Manual page 42

Using the AP Manager (continued)
Device Configuration>Filters
• Internal Station Connection: Enabling this allows wireless clients to communicate
with each other. When this option is disabled, wireless stations are not allowed to
exchange data through the access point.
• Ethernet to WLAN Access: Enabling this option allows Ethernet devices to communicate
with wireless clients. When this option is disabled, all data from Ethernet to wireless
clients is blocked. Wireless devices can still send data to the Ethernet devices when
this is disabled.
• Access Control: When disabled access control is not filtered based on the MAC
address. If Accept or Reject is selected, then a box appears for entering MAC
addresses. When Accept is selected, only devices with a MAC address in the list
are granted access. When Reject is selected, devices in the list of MAC addresses
are not granted access.
42