D-Link AirPlus Xtreme G DWL-2100AP User Manual page 12

Getting Started (continued)
Setting up
a Wireless
Infrastructure
Network
Please remember that D-Link AirPlus Xtreme G™ wireless devices are pre-configured to
connect together, right out of the box, with their default settings.
For a typical wireless setup at home (as shown above), please do the following:
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to the DI-624 Router (see the printed
Quick Installation Guide included with your router.)
Connect the Ethernet Broadband Router to the DWL-2100AP (See the printed
Quick Installation Guide included with the DWL-2100AP.)
If you are connecting a desktop computer to your network, install the D-Link
AirPlus Xtreme G™ DWL-G520 wireless PCI adapter into an available PCI slot
on your desktop computer.
(See the printed Quick Installation Guide included with the network adapter.)
Install the drivers for the D-Link DWL-G650 wireless Cardbus adapter into a
laptop computer.
(See the printed Quick Installation Guide included with the DWL-G650.)
2
3
6
12
1
4
5