3.Connect to PC
After MR6LCD
MR6LCD and PC
4.The battery charging
When the power goes down,power LED indictor blinks and the meter displays no
bars on the bottom right corner of the screen, which indicates that the power of
battery and please recharge it immediately.
precautions:
Connect the main device with the power supply and then plug the power supply into
the electrical outlet. The led light(red) will always be on.
1: Charge with adapter
2: Charge with USB
When charging the battery with USB , requires that the
power on, connect the
B
The USB connector is 10-pin specially
B
A
B
and
ends of the USB cable to
A
and
A
A
C
Computer
both connect wih PC
C
Computer