Sony Wega KV-HS38 Operating Manual page 10

Getting Started (continued)
4
If the upper and lower
bars are not equally
positioned to the top and
bottom of the screen,
move up or down to
adjust them, then press
.
The automatic channel
presetting menu appears.
5
Move up or down to
select "YES", then press
to preset the
channels automatically.
The screen will indicate
automatic presetting is in
progress. After channel
presetting is complete, the
last "INITIAL SETUP"
menu appears.
6
Move up or down to select "NO", then press
The "INITIAL SETUP" menu will not appear again the next time you turn
on the TV by pressing !.
To allow this menu to appear again, select "YES", then press
10
Using Your New TV
Tips
• When you install the TV to another location, make sure to adjust PIC
ROTATION and PIC V-POSITION using the menu (see page 56).
• You can immediately go to the end of the "INITIAL SETUP" menu by
pressing MENU.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 57).
Notes
• Before adjusting PIC ROTATION and PIC V-POSITION, keep external
speakers or other electrical equipment away from the TV. The magnetic
disturbance from these equipment or the direction of the earth's magnetic
field may affect the TV.
• If you do not succeed in adjusting PIC ROTATION and PIC V-POSITION,
turn off the TV and change its location or direction, then try to adjust
using the menu. Do not move the TV while the TV is turned on. If you do,
abnormal color patches may appear on the picture. Press ! on the TV to
turn off the TV for about 15 minutes, then turn it on again to demagnetize
the TV.
• When adjusting PIC ROTATION, adjust the value step by step. If you
rotate the bars largely at a time, color distortion may occur.
• You cannot adjust PIC ROTATION and PIC V-POSITION when HD signals
are input or "Memory Stick" mode is selected.
INITIAL SETUP
START AUTO PROGRAM
NOW?
YES
NO
INITIAL SETUP
PROG : 09
TV SYS : AUTO
VHF LOW
INITIAL SETUP
DISPLAY THIS MENU
NEXT TIME?
YES
NO
.
.