Unpacking And Installation Although it is neither complicated to install nor difficult to operate your Logic Double Cassette Tape Deck, a few minutes of your time is required to read manual for a properly wired installation and becoming familiar with its many features and how to use them. Please take a great care in unpacking your Logic Double Cassette Tape Deck and do not discard the carton and other packing materials.
Features NORMAL SPEED DUBBING While you are listening to the music what you wish, you can record at the same time. HIGH SPEED DUBBING You can reduce the time when you use a high-speed dubbing. AUTO SYNCHRO REC START When Deck A and Deck B synchronize playback, it will be recording Deck A from Deck B.
Front Panel Controls 1. Power Switch Pressing this switch ON will make the decibel(dB) indicating LED ON(2) and supply power to this unit. 2. Decibel(dB) Indicator This indicator appears output level / dubbing level. 3. Direction Indicator This indicator appears playback direction of the tape. 4.
Page 6
Front Panel Controls 9. Rewind Switch ( Press this switch to rewind the tape. 10. Fast Forward Switch ( Press this switch to fast forward the tape. 11. Eject Switch ( Use this switch to open cassette door or close and pull the tape out. 12.
1. PLAYBACK ※Deck A for playback and Deck B for playback and recording. This unit cannot synchronize playback Deck A at the same time with Deck B. 1. Press the power switch. 2. Insert tape in the Deck. 3. Select the reverse select mode switch. ( Deck A ) : One side play ( Side A - Stop, Side B - Stop ) : Continuous auto reverse ( side A and B ) 4.
2. RECORDING 1. Normal recording way If the cassette erasure tab on the lower edge has been removed, recording will not function. Press the power switch. Insert tape in the Deck B. Check the tape tight before inserting. Press the recording switch. - Select a sound source you wish to record.
Rear Panel Controls 1. Playback Output Jack This line cord is for connecting the tape playback jack of Pre-Amplifier. 2. Playback Volume Controller ( Variable Output Jack ) This controller to adjust a playback volume of variable output jack. 3. Recording Input Jack This line cord is for connecting a tape recording jack of Pre-Amplifier.
Specifications System ---------------------------------------- Logic Double Cassette Tape 2-Channel Stereo Head ------------------------------------------------- Hardpermaloid dubbing/playback head - 1 Hardpermaloid playback head - 1 Ferrite erase head - 1 Motor --------------------------------------------------------------------------- DC SERVO Motor x 2 Wow and Flutter ------------------------------- 0.12%(JIS WRMS), Less than 0.30%( Max ) Frequency response Normal Tape -------------------------------------------- 125Hz ~ 12.5KHz ( -20dB Recording ) S/N Ratio ------------------------------------------------------------------------------ More than 45dB...
Page 12
Guro-Gu, Seoul, Korea (152-082) Tel : 82)2+2612+4422 Fax : 82)2+2612+7676 Headquarter & Overseas Dep. 936-4, Kumuncheoun-Ri, Hyangnam-Myun, Hwaseong-City, Kyunggi-Do, Korea (445-922) Tel : 82)31+432+5112 / 82)31+432+4422 Fax : 82)31+352+7637 / 82)31+352+7649 Home Page : http://www.ekars.co.kr / http://www.samhyoung.co.kr E-mail : export@ekars.co.kr / trade@ekars.co.kr...
Need help?
Do you have a question about the edd-2203 and is the answer not in the manual?
Questions and answers