Charging The Battery - Konrow K-TAB 701 User Manual

1. Tablet description.
1 - Front camera
2 - Earphone jack
3 - Rear camera
4 - Micro USB port
5 - Volume
6 - ON/OFF button
7 - Reset
8 - Speakers
2. Inserting a MicroSD
It is possible to increase the internal memory of the K-TAB 701
device with a MicroSD card. (Maximum 32GB MicroSD card).
• Switch off the tablet.
• Insert the memory card into the relevant slot (N°7).
• Restart the K-TAB 701.
CAUTION: Inserting or removing a MicroSD card requires the
Tablette to be completely switched off.

3. Charging the battery

Charging the battery:
• To charge the battery, connect the USB cable (supplied) to
the USB port of your tablet and the other end to the charger
adaptor (supplied). Then connect the charger adaptor to a
power outlet.
• The battery charge icon illuminates during charging and
indicates the charge status.
• When the battery is fully charged, you can disconnect the
USB cable from the device then from the power outlet.
IMPORTANT:
• The tablet is recharged only via its USB port.
• Ensure your tablet is fully discharged before charging it
for the first time.
• The battery must be charged for at least 5 to 8 hours when
first charged.
Note: You can use the device when it is being charged. In this
case, the battery may take longer to charge fully.
EN