Technical Data - MORA-TOP 100 NTR/HV Operation And Installation Manual

The product comes with aG3/4" air relief valve and in the case of types MORA-TOP 100, 125
NTR, MORA-TOP 100, 125, 160 NTR/ HV also with a discharge valve
It is in your own interest to check the completeness of the delivery.
TYPE
OKC 100 NTR
OKC 125 NTR
OKC 160 NTR
OKC 200 NTR
OKC 250 NTR
OKC 200 NTRR
OKC 250 NTRR
Fig. 1
Connection of the heater exchanger (left, right)
and taps for inlet of cold water
O - Air relief valve
O – Odvzdušňovací ventil
U – Stop valve
U – Uzavírací ventil
P - Pressure relief valve with backflow valve
P – Pojistný ventil se zpětnou klapkou
M - Manometer
M – Manometr
Z – Test valve
Z – Zkušební ventil
U – Discharge valve
V – Vypouštěcí ventil
Connection to the cold water feed must correspond to ČSN 060830
Water heater pressure and heat loss
FLOW OF HEATING WATER (l/h)
720

Technical data

PRESSURE LOSS (mbar)
33
46
2x 33
Fig. 2
Mounting of hinges and temperature indicator
on the heater
Insert the indicator into the hole in the heater casing in the direction of the arrow.
(The indicator is part of the heater and can be found in the upper part of the packaging)
Heater in forwarding position
2x 33
kW/24h
0,9
1,05
1,4
1,8
2,1
1,8
2,1
Earthing screw
M8 (M10) x 20
4x washer Ø13
Fixing screw M12 x 30
Upper hinge