How To Adjust The Screen Automatically - LG Flatron L173ST User Manual

How to adjust the OSD (On Screen Display) screen.
PR
OK
PR
Pops up the
Select a menu
menu screen
icon
1
Press the MENU Button, then the main menu of the OSD appears.
2
To access a control, use the
3
When the icon you want becomes highlighted, press the OK Button.
4
Use the Buttons to adjust the item to the desired level.
5
Accept the changes by pressing the OK Button.
6
Exit the OSD by Pressing the EXIT Button.

How to adjust the screen automatically.

You need to adjust the screen display when connecting the monitor to a
new computer or changing the mode. Refer to the following section to
set an optimal monitor screen.
Press the AUTO/SELECT button (AUTO button in a remote controller)
in the PC analogue signal. Then, an optimal screen status will be
selected that fits into the current mode.
If adjustment is not satisfactory, you need to adjust screen position,
clock and phase in the OSD menu.
PR
OK
OK
PR
Select a menu icon
Adjust the status
• Use the remote controller to adjust the OSD screen.
Buttons.
A22
OK
Save
Exit from the
adjustment
menu screen.
PROCESSING AUTO
IMAGE ADJUSTMENT