KitchenAid KDFX6031 Use And Care Manual page 15

Select program
Overview of programs
The max. possible number of programs is
illustrated in the chapter "Program table". The
corresponding programs for your appliance can be
found on the panel
Choose program according to the attached
table of programs.
Duration of the program depends on the
external conditions in the apartment,
temperature and pressure etc.
For hygienic reasons it is recommended to
run at least once per month a high-
temperature cycle (e.g. Intensive 65). It will
help to keep the appliance clean, fully
functional and avoid odours.
Wash cycle
The dishwasher door must be closed and the water
tap open.
To pause the program (e.g. if you want to insert
an item):
- Open the door with caution (the program pauses)
and insert the item/s, (beware of HOT steam!).
- Press the button and close the door within 3
seconds (the program resumes the cycle from
where it was interrupted).
To Cancel the program on running:
- Open the door, press the button
door.
- (Water drains for up to 1 minute then the
appliance switches off).
To change the program in progress:
- Open the door, press the
running program and close the door.
- (Water drains for up to 1 minute then the
appliance switches off).
- Open the door and press any button except
button to switch on the appliance.
- Select a new program.
- Press the button and close the door within 3
seconds.
and close the
button to cancel the
15
Switching off the appliance.
Everything OK...
After the program is completed appliance turns into
Standby mode automatically. All indicator lamps
switch off.
Exercise caution when opening the door: beware of
hot steam.
Unload the appliance starting from the lower rack
in order to avoid any residual drips of water falling
onto crockery below.