Connecting A Camcorder - Sony KP-53XBR300 Operating Instructions Manual

Connecting a Camcorder

Use this connection to view a picture directly from
your camcorder.
1
Using AUDIO and S VIDEO* cables, connect
AUDIO and S VIDEO OUT on the camcorder
to AUDIO and S VIDEO IN inside the drop-
down panel on the front of the projection TV
(White-AUDIO Left, Red-AUDIO Right**).
2
Press VIDEO 2 to select the video inputs from
a camcorder.
* If your camcorder is not equipped with S VIDEO,
use a VIDEO cable (yellow) instead of the S
VIDEO cable.
**If you are connecting a monaural camcorder,
connect only the single audio output to the left
(MONO) input on the projection TV.
Disconnect all power sources before making any connections.
(Front of projection TV)
TV/VIDEO
– VOLUME + – CHANNEL +
STEREO TIMER/STAND BY
S VIDEO AUDIO
VIDEO
L(MONO) R
VIDEO 2 INPUT
VIDEO
S VIDEO AUDIO-L
AUDIO-R
YC-15V/30V
VMC-810S/820S
(not supplied)
(not supplied)
1
1
POWER
SET-UP FLASH FOCUS
Audio/video
outputs
Camcorder
13