Table of Contents
Advertisement
Cleaning and maintenance
Aqua clean
The aqua clean setting switches the lower element on. Set your oven to 70˚C. Pour 0.5 litre of water
into a baking tray and place the baking tray onto guide position 1. After 30 minutes the moisture will
have softened any baked on food and make it easy to wipe clean.
Before cleaning make sure the oven is switched off at the mains power, and the oven has
cooled down.
Appliance housing front
Clean the surfaces with liquid non-abrasive detergents intended for smooth surfaces, and a soft
cloth. Apply the detergent on the cloth and wipe off the dirt; then, rinse with water. Do not apply the
detergent directly to the surfaces. Do not use aggressive or abrasive cleaners, sharp objects or steel
wool, as these will scratch the appliance.
Aluminium surfaces
Aluminium surfaces should be cleaned with non-abrasive liquid detergents intended for such materials.
Apply the detergent on a wet cloth and clean the surface; then, rinse the surface with water. Do not
apply the cleaner directly on the aluminium surface. Do not use abrasive cleaners or abrasive sponges.
The surface should not come into contact with oven cleaning sprays.
Stainless steel front panels
Clean the surface with a mild cleaner (soapy water) and a soft sponge that will not scratch the material.
Do not use abrasive or solvent-based cleaners. If these instructions are ignored, the housing surface
can be damaged.
Lacquer-coated and plastic surfaces
Clean the buttons / knobs and the door handle with a soft cloth and liquid detergents intended for
cleaning smooth lacquer-coated surfaces. You may also use the cleaners made especially for this type
of surfaces; in this case, follow the manufacturer's instructions.
The above surfaces should never come into contact with oven cleaning sprays, as these will
permanently damage the aluminium parts.
22
SMMFOB13/W13_IB.indd 22
(only with some models)
(only with some models)
04/06/2013 21:36
Hide quick links:
Advertisement
Table of Contents
