Neck Assy Twist Adjustment; Sfc Coarse Adjustment - Sony TRINITRON KV-HR36M61 Service Manual

4-6. NECK ASSY TWIST ADJUSTMENT

(1) Receive dot/hatch pattern.
(2) Turn FOCUS VR fully counter-clockwise.
(3) Confirm the dot shape at the screen center. (Fig. 4-5)
(4) Resume FOCUS VR.
Note
In case of turning NECK ASSY, loosen the screw 3 turns. Do not
move the position.
OK
Turn NECK ASSY clockwise.
Turn NECK ASSY counter clockwise.
Fig. 4-5
4-7. PICTURE DISTORTION ADJUSTMENT
Note: In this adjustment use the monoscope signal.
Adjust in the service mode "DEF1" and "DEF2".
0 (VPOS)-DEF1
2 (VLIN)-DEF1
11 (SCRL)-DEF1
13 (LVLN)-DEF1
2 (HSIZ)-DEF2
5 (PIN)-DEF2
7 (LCP)-DEF2
9 (VANG)-DEF2
1 (VSIZ)-DEF1
3 (VSCO)-DEF1
12 (UVLN)-DEF1
1 (HPOS)-DEF2
6 (UCP)-DEF2
8 (PPHA)-DEF2
11 (VBOW)-DEF2
– 51 –

4-8. SFC COARSE ADJUSTMENT

Summary:
Move the marker to the position as shown in the figure and
adjust the convergence or the landing at its position.
Also to move the marker is available with the buttons 1 and 4 on
the remote commander.
Landing: 1 t 2 t 3 t 4 t 5 t 6 t 7
Select R, G or B signal by pressing "6" on the remote commander.
In case of selecting VIDEO without input, a single color is
displayed.
In case of adjusting 1 position, observe the (1) positions.
Convergence: 1 t 2 t 3 t 4 t 5 t 6 t 7t 8
Adjust the position from outer to inner as shown in the figure.
KV-HR36M61
RM-1007