Table of Contents
Advertisement
Quick Links
.....................................................................................................................
190/195 Tilt Shower Commode
User Manual
Limited Warranty:
EZee Life products carry a two year warranty against
manufacturing defects, faulty materials and workmanship only.
Any alterations, misuse, abuse, or accidental damage voids this
warranty. EZee Life reserves the right to replace or repair any
part that has become defective.
The warranty does not extend to consequential costs resulting
from the fault or defect of the product: freight and travel costs,
loss of earnings, or other expenses that one may incur.
Warranty is valid for the original purchaser only and the original
receipt must be
presented before any warranty options are considered. Please
also be prepared to
provide the date of purchase and serial number.
EZee Life™ Products
34 Futurity Gate, Unit # 15 Concord Ontario L4K 1S6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EZee Life 190 Tilt Shower Commode
Summary of Contents for EZee Life 190 Tilt Shower Commode
-
Page 1: Limited Warranty
Any alterations, misuse, abuse, or accidental damage voids this warranty. EZee Life reserves the right to replace or repair any part that has become defective. The warranty does not extend to consequential costs resulting from the fault or defect of the product: freight and travel costs, loss of earnings, or other expenses that one may incur. -
Page 2: Specifications
Specifications: Frame Material – Aluminum Tilt Range – 20° Weight – 36 lbs (#190) 38 lbs (#195) Rear wheels – 5” standard or optional 24” Front Casters – 5” Seat Width – 18” (#190) 20” (#195) Seat Depth – 17” Standard Seat Heights –... -
Page 3: Assembly Instructions
Assembly Instructions 1. Slide seat belt loops (1) onto each side of backrest (2) posts. 2. Insert two back support posts (1) into seat frame (2) and tighten two hand wheels (3). 3. Insert four caster stems (1) into holes (2) in the four corners of the bottom of the seat frame (3). - Page 4 6. The adjustment is made by simply depressing the anti-tipper push pin (1), sliding the inner anti-tipper tube (2) to the desired length, aligning the push pin with the closest adjustment hole (3) and allowing it to pop through. (The anti-tippers should be as close to the floor as possible without catching on doorway thresholds, changes in floor levels or other obstacles.) 7.
- Page 5 Adjustments Headrest – The headrest on this commode is referred to as an “X” headrest and the smaller end of the “X” is at the bottom to support the neck where it meets the back of the skull. The arms of this style of headrest can be flexed in or out as needed by simply pulling them apart or squeezing them together to provide more control or more freedom as needed.
-
Page 6: Operating Instructions
Adjustments cont'd Footplate Adjustment – Proper footplate adjustment is required for comfort and reduction of pressure points. If the footplates are positioned too high pressure is increased on the buttock area; if they are too low, pressure is increased on the the backs of the legs just above the knees and the feet are left dangling. - Page 7 Operating Instructions cont'd Tilting – The tilt feature of the 190 tilt shower commode can be used for comfort, for those users who have balance control problems or may squirm in the seat too much to be safe when the seat is level.
- Page 8 Optional 24” Wheels The optional 24” wheels allow the user to be able to self propel the shower commode and provide a level of independence. The 24” wheels are equipped with contoured hand rims for better grip, solid maintenance free lightly treaded tires to ease propulsion and quick release axles to allow to wheels to be removed and replaced easily without tools.
- Page 9 Wheel Lock Installation for 24” Wheels – When the optional 24” wheels are ordered with your commode the push to lock hand brakes will need to be installed to the side frame seat rail. The wheel lock assemblies are clamped to the seat rail (1) using a double clamp that simultaneously tightens onto the seat rail and wheel lock mounting bar.
-
Page 10: Safety Information
Safety Information Never operate the tilt mechanism without having a firm grip on the commode push bar. The gas struts used to aid in tilting the commode need to be controlled while changing the tilt angle to prevent the chair from pitching forward Ensure back rest is securely attached before using. -
Page 11: Inspection Items
Ensure the hand brakes are easy to engage and prevent the wheels from turning. Cleaning Instructions EZee Life commodes can be cleaned with most commercial cleaning products. Do not use abrasives on the foam seat and back pads. We recommend cleaning the surfaces of the commode and attachments with a solution made from a mild detergent (dish soap, etc.) to remove organic materials.
Need help?
Do you have a question about the 190 Tilt Shower Commode and is the answer not in the manual?
Questions and answers