Optimize Standby - Miele G 4970 Operating Instructions Manual

Optimize Standby

"Optimize Standby" is activated by de‐
fault.
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a program.
The dishwasher will not turn off while
a program is running, during the delay
start period, or if there is a fault.
Optimize Standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off au‐
tomatically increases to 6 hours. Doing
this will increase energy consumption.
Open the door.
Turn the dishwasher off with the
button, if it is turned on.
Press the program selection button
, and, simultaneously switch the
dishwasher on using the
Keep the program selection button
pressed in for at least four seconds
until the lower right program indicator
light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the
The
at short intervals.
The flashing sequence in the display
shows whether or not Optimize Stand‐
by is activated.
–
–
Press the program selection button
to change the setting.
The setting is now stored in memory.
Turn the dishwasher off with the
button.
button.
button 8 times.
indicator light will flash 8 times
: "Optimize Standby" activated
: "Optimize Standby" deactivated
Options
43