Download Print this page

Xcellon CR-P2P User Manual

Table of Contents

Download this manual

CR-P2P

Portable USB 3.0 Card Reader

Thank you for choosing Xcellon.

The Xcellon CR-P2P Portable Card Reader is compatibile with SD and microSD memory cards,

delivering maximum read/write speeds up to 5.0 Gbps via its integrated USB 3.0 connector. The

CR-P2P's pocket-sized design makes it a great solution when you need a portable card reader that

you can take anywhere.

User Manual

Table of Contents

Need help?

Do you have a question about the CR-P2P and is the answer not in the manual?

Page 1 The Xcellon CR-P2P Portable Card Reader is compatibile with SD and microSD memory cards, delivering maximum read/write speeds up to 5.0 Gbps via its integrated USB 3.0 connector. The CR-P2P’s pocket-sized design makes it a great solution when you need a portable card reader that you can take anywhere.
Page 2 Overview 1. SD/SDHC/SDXC 2. microSD/miroSDHC/microSDXC 3. USB 3.0 connector Also Included • User manual Precautions • Please read and follow these instructions, and keep this manual in a safe place. • Do not disconnect the card reader or remove your memory card during file transfer or without following your computer’s protocol for safely ejecting a removable disk.
Page 3 Connecting the CR-P2P Install the CR-P2P by plugging the USB connector into an available USB port on your computer. To achieve maximum data transfer rates of 5.0 Gbps, plug the card reader into a USB 3.0 port. After the card reader is connected, insert a compatible memory card into the corresponding slot.
Page 4 One-Year Limited Warranty This XCELLON product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair...