Samsung HT-DL100 Instruction Manual page 33

Speaker Setting Methods
Press the Test Tone button.
•
The test signal will be sent to the Left Front, Center, Right Front,
Right Rear, Left Rear and Subwoofer in that order.
To End the Language Features Setup
•
Press the Test Tone button again.
While in DSP or PRO LOGIC mode, TEST TONE may
operate differently for VCDs or CDs.
Selecting Dolby Pro Logic
Press the Pro Logic button.
Converts Dolby Surround encoded 2-channel sound (e.g., program material received by Stereo
VCR could be Dolby Surround encoded 2-channel material that can be decoded into 4-channel
sound using the Dolby Pro Logic mode). Pro Logic mode can also be enjoyed when in DVD
mode or when playing Dolby Digital or PCM material that are Dolby Surround encoded.
1
Press the Function Selection button to
select the desired function.
•
Select from FM, AM, DVD and ANALOG IN.
Test Tone
Test Tone
Pro Logic
Press the PRO LOGIC button.
•
Each time the Pro Logic button is pressed
PRO LOGIC
L C R
LFE
S
PRO LOGIC : Left, Center, Right, Subwoofer and
Surround Channel
PRO LOGIC
L C R
LFE
3-STEREO : Left, Center, Right and Subwoofer
Channel
L R
LFE
STEREO : Left, Right and Subwoofer Channel
L C R
LFE
LS RS
2
GB
32