Table of Contents
Advertisement
Backlight
You can select the method of backlight during the
operation of the Java™ application from the following
three types:
• "On":
• "Off":
• "Normal Settings":Works with the main backlight
1.
Perform steps 1 to 4 in "Operation Priority" on
page 48.
2.
Press
or
to select "Backlight", then press
.
3.
Select "On/Off", then press
4.
Select "On", "Off" or "Normal Settings" by
pressing
or
To Set the Blinking Operation
You can set whether the blinking operation, which is
embedded in Java™ application, is enabled.
1.
Perform steps 1 and 2 in "Backlight".
2.
Press
or
to select "Blink", then press
49
Fun & Games
Lit whilst the Java™
application is operated.
Unlit whilst the Java™
application is operated
even if a key is pressed.
setting. (p. 85)
.
, then press
.
3.
Select "On" or "Off" by pressing
press
.
Vibration
When vibrator is set in the Java™ application, you can
choose whether the operation is enabled or disabled.
When a SMAF file is specified in the Java™
application, you can operate the vibrator set in the
SMAF file.
Note
• SMAF (Synthetic music Mobile Application Format)
is a format of music data for mobile phones.
1.
Perform steps 1 to 4 in "Operation Priority" on
page 48.
2.
Press
or
.
3.
Press
or
"Link to Sound", then press
When you set "Link to Sound", the Java™
application is syncronised with the vibrator.
.
or
to select "Vibration", then press
to select "Enable", "Disable" or
.
, then
Advertisement
Table of Contents
