General Safety Rules - Lincoln Electric Expressweld MasterMIG 250CT User Manual

Gas metal arc welding machine
Table of Contents

Advertisement

Expressweld MasterMIG 250CT

1 General Safety Rules

THIS MACHINE HAS BEEN DESIGNED FOR GMAW (MIG/
MAG). SHALL NOT BE USED FOR ANY OTHER PURPOSE.
WARNING: This symbol indicates that the instructions within the user guide
must be followed to avoid potential serious personal injury, loss of life and
damages on machine. Protect yourself and other people.
Be sure that this machine should only operated by qualified personnel.
Be sure that all installation, operation, maintenance and repair
procedures are performed only by authorized personnel. Be sure to read
user guide carefully before operating the machine. Failure to follow the
instructions included in the user guide may cause serious injury, loss of
life and damage on machine. Please read the warnings next to the
symbols stated below. "Kaynak Tekniği Sanayi ve Ticaret A.Ş." is not
liable for any damages due to improper connection, storage conditions
and operation procedures.
READ AND UNDERSTAND THE INSTRUCTIONS CAREFULLY:

Be sure to read and understand the user guide before
operating the machine. Failure to follow the instructions stated
in the user guide may cause serious injury, loss of life and
damage on equipment.

Do not weld while you are unattentive, unattentive, tired and sleepless.

Arc welding is a safe application when necessary measures are taken to protect the
welder against potential dangers. If these measures missed or disregarded, there
may be dangers such as electric shock, exposing to high levels of fume and gas, arc
radiation, fire and explode which may cause serious injury or even death.
Note: For detailed information on safety in welding, please read ANSI Z49.1 standard.
Protective Equipments:

Welding operators should wear protective clothing to protect themselves against
burning risk. Welding burns is a frequent risk which may be caused due to splash of
welding sparks on bare skin.

Clothing used while welding may vary based on used welding method but generally it
should provide easy movements and should cover welder's body to protect against
splashes, sparks and arc radiation.
Page 1

Advertisement

Table of Contents
loading

Table of Contents