Feeding Motion Of The Top Feed Dog - Pfaff 3827-4/33 Instruction Manual

12

Feeding motion of the top feed dog

.05.12
Requirement
When the needle bar is positioned 0.6 mm past t.d.c (adjustment hole 1) and the maximum
stitch length is set, lever 3 should not move when the feed reverse key is operated.
Fig. 12 - 12
While continuously operating the feed reverse key, adjust eccentric 1 (screws 2) so that
the slot is pointing towards the operator and lever 3 does not move.
2
1
4
1
3
49-030
Adjustment
6
3
4
5
12 - 15