Programmed Sewing (Shoulder Seams) - Pfaff 3827-4/33 Instruction Manual

10

Programmed sewing (shoulder seams)

.02
In the programmed sewing mode previously defined seam segments for the shoulder
seams are sewn automatically.
Switch on the machine.
If necessary, call up programmed sewing.
If necessary, change the tack value, also see Chapter 9.09 Entering the start and end
backtacks.
If necessary, change the maximum speed, see Chapter 9.08 Entering the maximum
speed.
If necessary, change the number of stitches for the fullness with the corresponding
+/- keys, see Chapter 9.07 Pre-selecting the stitch length and fullness.
Further functions, also see Chapter 7.07.02 Function keys:
Sewing is carried out with the pedal functions, see Chapter 7.02 Pedal.
10 1
Start backtacks on/off
End backtacks on/off
Needle position raised on/off
Presser foot raised on/off
Presser foot raised after
thread trimming on/off
3
Thread trimming on/off
Fixed speed on/off
Reverse sewing direction on/off
Programmed stop on/off
Stitch count on/off
Sewing
10 - 2