Test Mode - Sony HCD-DX400 Service Manual

2-8. OPTICAL PICK-UP BLOCK (KHM-313CAA)
6 optical pick-up block
(KHM-313CAA)
1 two screws
(PTP2 5)
3 insulator
5 connector
– DVD mechanism deck block bottom view –
2-9. BELT
4 tray
2
HCD-DX400
1 two screws
(PTP2 5)
3 insulator
4 flexible cable (24 core)
3 insulator
3 insulator
2 mechanism deck
(CDM85 (MB))
7 chuck cam
8 belt
6 shaft
3 claw
5 two hooks
3 claw
bottom side
1 Push the lever in the
Remote commander is necessary for the execution of test mode.
It is necessary to connect the TV monitor with the set for the test
mode confi rmation.
SOFTWARE VERSION CHECK AND FACTORY RESET
Refer to servicing notes "MODEL CLASSIFICATION" (page 4)
for details.
TRAY LOCK MODE
Procedure:
1. Press the [
?/1
2. Press and hold the [
5 seconds).
3. The message "LOCKED" appears on the fl uorescent indicator
tube, and disc tray is locked.
4. To release this mode, do the step 2 again.
5. The message "UNLOCKED" is displayed on the fl uorescent
indicator tube, and the disc tray is unlocked.
DivX CODE VERSION CHECK
Procedure:
1. Press the [ ?/1
2. Press the [OPEN/CLOSE
3. The button on the remote commander is press in order of
] → [SHIFT] press and hold → [3] → [4] → [8] → [9] →
[ x
[SHIFT] release → [ENTER].
4. The DivX code version is appears under the left of the TV
screen.
Example: "DIVX: 1389 05.10.02.01"
5. The display disappears in a few seconds.
MACROVISION VERSION CHECK
Procedure:
1. Press the [
?/1
2. Press the [OPEN/CLOSE
3. The button on the remote commander is press in order of [
→ [SHIFT] press and hold → [6] → [2] → [2] → [7] → [6] →
[SHIFT] release → [ENTER].
4. The Macrovision version is appears under the left of the TV
screen.
Example: "MAC: 1389 05.00.04.07"
5. The display disappears in a few seconds.
direction of the arrow.
11 11
SECTION 3

TEST MODE

] button to turn on the system.
] and [OPEN/CLOSE ] buttons (around
x Z
] button to turn on the system.
Z ] button to open the disc tray.
] button to turn on the system.
] button to open the disc tray.
Z
x ]
HCD-DX400