Sony HCD-DX400 Service Manual page 10

HCD-DX400
2-6. MAIN BOARD
Note 1: When disconnecting the fl exible cable (24 core) of optical pick-up block, solder the short-land.
– DVD mechanism deck block bottom view –
2-7. FFC HOLDER
Note 1: This illustration sees the DVD mechanism deck block from optical pick-up block side.
3 FFC holder
Note 2: Remove the FFC holder from the
1 two claws
10
2 flexible cable (24 core)
original set and install it again.
DVD mechanism deck block
(CN8)
Note 2: When assembling the optical pick-up block,
3 MAIN board
1 two claws
1 Solder the short-land.
remove the solder of short-land after
connecting the flexible cable (24 core).
2 two claws