Front Dial/Rear Dial - Panasonic LUMIX DMC-GX8 Owner's Manual

Preparation/Basic

Front Dial/Rear Dial

Rotating:
Selection of items or setting of values is performed during the various settings.
•
This owner's manual describes operations of the front dial/rear dial as follows:
e.g.: When rotating
the front dial to the
left or right
Allows you to set the aperture, shutter speed, and other settings when in
modes.
Mode dial
•
In [Dial Set.] in the [Custom] menu, you can change the operation methods of the rear dial and
front dial.
Temporarily changing the items assigned to the front/rear dials ([Dial Operation
Switch])
You can temporarily change the items assigned to the front/rear dials using the function
button to which [Dial Operation Switch] is assigned.
[Dial Operation Switch] is assigned to [Fn13] at the time of purchase. (P25)
•
You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch
Setup] in [Dial Set.] in the [Custom] menu.
1
Press [Fn13] A.
•
A guide will be displayed showing the items temporarily
assigned to the front/rear dials.
2
Rotate the front/rear dials while the guide is
displayed.
•
The settings of the items assigned to the dials will change.
3
Press [MENU/SET] and set.
•
You can also complete this step by performing either of the operations below:
–
Press the shutter button halfway
–
Press [Fn13]
•
Items that are temporarily assigned to the front/rear dials can be used only while the guide
1
(step ) or setting screen (step
22
SQT0775 (ENG)
Front dial
Program Shift
Aperture value
Shutter speed
Aperture value
2
) is displayed.
e.g.: When rotating
the rear dial to the
left or right
Aperture value
/ /
Rear Dial
Program Shift
Shutter speed
Shutter speed
A
/