Use Arcsoft Photoimpression(Walmart) - Vivitar DSC350 User Manual

Use PhotoImpression (Wal-Mart)
Open the PhotoImpression :
1. Search through Start>Programs>
Arcsoft PhotoImpression>Arcsoft
PhotoImpression 3.0. You should
get the screen on the left.
Create new album :
1. At the lower part of the screen, select
[New] from the pull-down menu as
shown. You can change the name of
the new album to, say "My Photos".
Add photos from the camera :
1. Take some photos and connect the camera
and turn the Mode dial to "PC"
2. Click the "Add" icon as shown
3. From the Open dialog box, select Removable
Disk X: (where X is the next available drive
specification in your computer)
4. Double-click on "Dcim" and then "100cnxnt"
folder
5. Click on the image file you want to add and
click Open. The added images will show as
a thumbnail.
Note: Only thumbnails are saved to the album.
If you want to access the images when the
camera is disconnected, make sure you save
the image files to the hard drive
Slide Show :
After creating the album, you can click the
'Slide Show' icon to play slide show of this
album.
28