Record Power RPBG6L Original Instruction Manual
  1. Manuals
  2. Brands
  3. Record Power Manuals
  4. Grinder
  5. RPBG6L
  6. Original instruction manual
Record Power RPBG6L Original Instruction Manual

Record Power RPBG6L Original Instruction Manual

6” bench grinder with light
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Original Instruction Manual
RPBG6L
6" Bench Grinder with Light
IMPORTANT
For your safety read instructions
carefully before assembling or using
this product. Save this manual for
future reference.
Version 2.0
June 2010
Woodworking Machines & Accessories
Record Power Ltd
Telephone: 01246 561 520
Unit B, Adelphi Way
Fax: 01246 561 537
Staveley S43 3LS
HEALTH AND SAFETY GUIDELINES
Always follow the instructions provided with the manual. Always wear safety glasses when using woodworking
equipment. Always disconnect the power before adjusting any equipment. Failure to observe proper safety
procedures and guidelines can result in serious injury.
WARNING: Do not allow familiarity (gained from frequent use of your machine and accessories) to become
commonplace. Always remember that a careless fraction of a second is sufficient to inflict severe injury.
Email: sales@recordpower.co.uk
www.recordpower.co.uk
Always wear safety glasses when
using woodworking equipment.
Always read the instructions
provided before using
woodworking equipment.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RPBG6L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Record Power RPBG6L

Summary of Contents for Record Power RPBG6L

  • Page 1 Save this manual for future reference. Version 2.0 June 2010 Woodworking Machines & Accessories Record Power Ltd Telephone: 01246 561 520 Email: sales@recordpower.co.uk Unit B, Adelphi Way Fax: 01246 561 537 www.recordpower.co.uk Staveley S43 3LS HEALTH AND SAFETY GUIDELINES Always follow the instructions provided with the manual.

  • Page 2: Table Of Contents

    Contents Page 1. Introduction 2. Health & Safety Guidance 3. Additional Safety Instructions 4. Record Power Guarantee 5. Specification 6. Installation 7. Operating the Grinder 8. Mounting of Wheels 9. Wheel Care 10. General Care 11. Parts Identification 12. Spare Parts Identification...

  • Page 3: Introduction

    1. Introduction Dear Customer, Thank you for investing in a Record Power product, which has been designed to give you years of satisfying service. Please do not ® forget to fill in and return your guarantee card. (This does not affect your statutory rights).

  • Page 4: Health & Safety Guidance

    2. Health & Safety Guidance READ ALL THE INSTRUCTIONS IN THIS MANUAL CAREFULLY BEFORE ASSEMBLY, 15. Maintain tools with care. INSTALLATION AND USE OF THIS PRODUCT. • Follow instructions for lubrication and changing accessories. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE. •...

  • Page 5: Additional Safety Instructions

    3. Additional Safety Instructions for Woodworking SAFETY IS A COMBINATION OF OPERATOR COMMON 1974’, and the ‘Provision & Use of Work Equipment Regulations 1998’. We recommend that you study and follow these regulations. SENSE AND ALERTNESS AT ALL TIMES WHEN THE For further help on any of the above matters please contact our Customer MACHINE IS BEING USED.

  • Page 6: Record Power Guarantee

    2.2.2 We are given a reasonable opportunity after receiving notice of the claim to examine the product. 2.2.3 If asked to do so by us, you return the product to Record Power's premises or other approved premises such as those of the supplying dealer, for the examination to take place.

  • Page 7: Specification

    5. Specification Motor: 240V ~ 50Hz Motor Power: 250W Speed: 2800rpm Noise Emissions (no load): < 85db (A) Weight: 6kg (13.2lbs) 6. Installation The voltage supply to which the machine is to be connected must be within range shown on the machines specification label.

  • Page 8: Mounting Of Wheels

    To obtain wheel balance and good efficient grinding action the wheel must be re-dressed. We recommend use of Record Power dressing sticks, use the coarse grey stick (Part no: SDS-1) to remove imperfections and debris to ensure a true running circular stone. Then use the fine textured white stick (Part no: SDS-2) to clean your grindstone back to its original condition.

  • Page 9: Parts Identification

    11. Parts Identification Light Spark Shield Flexible Arm Spark Arrestor Motor Housing Wheel Guard Grinding Wheel Grinding Wheel Tool Rest Tool Rest Lock Start/Stop Switch Base...

  • Page 10: Spare Parts Identification

    12. Spare Part Identification Item Description Item Description Eye shield support Washer 5 Screw M5*45 Rubber mat Washer 5 Base plate Washer 5 Capacitor Nut M5 Bearing Protective cover Rotor Motor guard Bolt M5*135 Nut M12 Stator Screw M5*15 Plug Flange Strain relief cap Stone washer...
  • Page 11 EU Declaration Of Conformity Cert No: EU / RPBG6L / 1 RECORD POWER LIMITED, Unit B, Ireland Industrial Est. Adelphi Way, Staveley, Chesterfield S43 3LS declares that the machinery described:- Type: 6” Bench Grinder with Light 2. Model No: RPBG6L Serial No .................
  • Page 12 Visit www.recordpower.co.uk for the full range of Record Power products. Woodworking Blades Machinery Craft Accessories Finishes and Waxes DVDs Accessories Woodworking Machines & Accessories Record Power Limited Telephone: 01246 561 520 Email: sales@recordpower.co.uk Unit B, Adelphi Way www.recordpower.co.uk Facsimile: 01246 561 537 Ireland Industrial Est.

Table of Contents