The Hardware; Front Panel - DCS P9i Mk2 User Manual

dCS P8i Mk2 User Guide
Data Conversion Systems Ltd.

THE HARDWARE

This section briefly explains the layout of the front and the rear panel and what the symbols stand for.

Front Panel

H I
Key to the front panel
A- Power Button
B - Stop / Eject Button
C - Play / Pause Button
D - Previous Track / Menu Step Back Button
E - Next Track / Menu Step Forward Button
F - Menu / Select Button
G - Rotary Control
H - Remote Control Sensor
I - SACD / CD Drawer
J - Main Display
A – Power
• To power up or switch out of standby mode, press the
• When you have finished listening, press the
The Power button will glow red and the rest of the display will turn off.
• To switch off completely, hold down the
release it. Please wait at least 10 seconds before switching on again.
• When the menu is open, press the
B – Stop / Eject
• When there is no disc in the player, or if the disc is stopped, press this button to open the tray.
• When the tray is open, press this button to close the tray.
• When a disc is playing, press this button to stop the disc.
C – Play / Pause
• With a disc loaded, press this button to start playing.
• Press it to pause and press again to resume playing.
Manual filename: dCS P8i User Guide v2_0x.docx
English version
J
Power
Power button for a few seconds until it glows lilac, then
Power button to close it or wait for time-out.
Page 8
Guide for Software Issue 2.0x
A B C D E F
Power button briefly.
button briefly to set the unit to standby mode.
March 2011
G
www.dcsltd.co.uk