Clearing CMOS settings
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
Remove the
computer
Procedure
1
Locate the CMOS reset jumper (CMCLR) on the system board.
NOTE: For more information on the location of the CMOS jumper,
see
"System-board
2
Remove the jumper plug from the password jumper-pins (PSWD) and
connect it to the CMOS jumper-pins.
computer. After working inside your
cover.
components".
After working inside your
103