Rds Function; Manual Station Search; Manual Storing Of Stations In The Memory; Automatic Storing Of Fm Stations In The Memory (Autostore) - PEUGEOT 306 2002 Owner's Manual

Table of Contents

YOUR 306 IN DETAIL

Press the "MAN" button.

Briefly press button "J" or "K" respectively to increase or reduce the frequency displayed.

By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.

Scrolling stops as soon as you release the button.

Pressing the "MAN" button again returns you to automatic station search.

Select the station required.

Press for more than two seconds one of the buttons "1" to "6".

The sound stops then becomes audible again, confirming that the station has been stored in memory.

Press the "BND/AST" button for more than two seconds, to automatically store the 6 stations with the strongest

signal in FM. These stations are stored in the FMIII waveband.

- If it is not possible to find 6 stations, the remaining memories are empty.

Recalling stations stored in the memory

For each waveband, briefly pressing the buttons "1" to "6" recalls the corresponding stored station.

RDS FUNCTION

Using the RDS (Radio Data System) function on FM

RDS allows you to continue to listen to the same station, whatever frequency it is using for the region you are going

through.

Switch the function on or off by briefly pressing the "RDS" button.

RDS station following

The display indicates the name of the station selected. The radio is continually searching for the station which has

the best reception and which is transmitting the same programme.

Table of Contents