Samsung NP915S3G-K01US User Manual page 46

Connecting an External Display Device
1
Connect the VGA adapter to the monitor port of the
computer.
Connect the VGA cable (15-pin) to the connected VGA
adapter and then connect the other end of the VGA cable to
the D-SUB port of the monitor or the TV.
External
Monitor
z
VGA
Adapter
x
2
Connect the power cord of the connected monitor, TV or
projector and turn the power on.
Change your TV to external device mode when connecting to
the TV.
TV
Projector
3
Press the +
setting screen appears where you can select the monitor
mode.
Since pressing the
changes the selection, select a display device.
Computer only
Duplicate
Extend
Projector only
Alternatively, to set up dual view:
Open the Display Settings window in the Control Panel,
select Monitor 2 and select the Expand to fit to this
monitor checkbox to set dual view. For more detailed
information, refer to the Windows online help.
Chapter 2.
Using the computer
key combination once. Then the
key while holding down the
46
key