Download Print this page

Klokers KLOK-01 User Manual page 3

Advertisement

User manual
CHARACTERISTICS
THE CASING
• The klokers Key: a pushbutton
at 8 o'clock to unlock the
watch head from its base
• Material: metal-polymer composite

• Dimensions: 44 mm wide x 11,5 mm deep
• Waterproof, down to 5 m

• Assembly: partially non-dismantable
technical construction
• Glass: transparent decorated polymer
with built-in magnifying lens
RETARDED/ADVANCED TIMING
• Less than 10, more than 20
seconds (monthly average)
MOVEMENT
• Swiss Made
• 
 D riven by a high-tech Ronda movement
(high precision Quartz movement)
• Displaying the rotary discs is
made possible thanks to the use of
extremely energy efficient movement
BATTERY
• 1,55 V battery, standard 371
AUTONOMY
• About 16 months
GUARANTEE
• Two-year warranty against
all production defects
(See the guarantee given
at time of purchase)
WARNING
Do not try to dismantle or modify the watch.
Do not remove the battery from the watch: battery replacement
requires special knowledge and professional expertise. Please
contact the retailer where you purchased the watch.
Despite the fact that the timepieces have passed series of tests,
they remain fragile objects. Please handle it with care and do
not drop or knock or bump or hit or crush the watch.
Keep out of reach of babies and children.
Do not put your klokers under clear water. The pressure of
normal tap water may decrease waterproofness performance of
a waterproof watch conceived for the everyday life. Remove the
watch before taking a bath or going into the sauna.
Do not turn or pull the crown when the watch head is wet, the
water could penetrate the watch. If the inner surface of the glass
is fogged, or if water drops appear inside the watch, this means
waterproofness has been diminished. Immediately contact the
retailer where you have purchased the watch.
Keep in mind waterproofness of a watch can be diminished by
the deterioration of the adhesive of the glass or the seal, or by
rust formation on stainless steel parts. Steam, soap, or some
components of a heat source can accelerate waterproofness
degradation.
Avoid wearing the watch or store it in the following places:
places in which volatile agents are sprayed (cosmetic products
such as solvents, insecticides, paint solvents, etc.), places in
which temperature remains below +5 °C or above 35 °C for
a long time; very damp places; places affected by a powerful
magnetic field or static electricity; dusty places; places affected
by strong vibrations.
Do not put in contact with acid, acetone or any other chemical
product. In case of contact, immediately rinse with cold water
to minimise the impact.
Stop wearing the watch immediately if the case or the bracelet
is affected by corrosion.
If you notice any symptoms of allergy or skin irritation, stop
wearing the watch immediately and consult a dermatologist or
an allergist.
klokers.com

Advertisement

loading