User manual
KLOK-02
BASIC FUNCTIONING
Jumping hours, retrograde minutes and seconds, perpetual date, time zone (GMT).
The procedure must be performed in its entirety in order to validate the settings.
If you make a mistake, you can't go back to the settings, you must end the process
to restart it from the beginning. If you change the battery, please check the
index settings.
We invite you to consult the following tutorial in order to set time on your
watch.
MODE DISPLAY
10h20'45"
Seconds (S)
Minutes (M)
Hours (H)&
Perpetual calendar (Pc)
Red button (R)
Time zone (Tz)
SETTINGS
1. Pulsing the pusher (P), choose a time zone (Tz).
2. To validate, pull the crown to position (2) and push it into position (1).
3. Pulsing the pusher (P), set the hour (H).
4. To validate, pull the crown to position (2) and push it into position (1).
5. Pulsing the pusher (P), set the minute (M).
6. To validate, pull the crown to position (2) and push it into position (1).
7. Pulsing the pusher (P), set the year (Pd).
8. To validate, pull the crown to position (2) and push it into position (1).
9. Pulsing the pusher (P), set the month (Pd).
10. To validate, pull the crown to position (2) and push it into position (1).
11. Pulsing the pusher (P), set the date (Pd).
12. To validate, pull the crown to position (2) and push it into position (1).
13. Time is displayed.
NOTA
If you change the battery, please check the index settings.
Crown pushed (1)
Crown pulled (2)
Pusher (P)
klokers.com