D-Link DWL-3200AP User Manual page 25

Managed
Hide thumbs Also See for DWL-3200AP:
Table of Contents

Advertisement

DWL-3200AP User's Manual
Fragment Length:
RTS Length:
Transmit Power:
Super G Mode: Super G is a group of performance enhancement features that
802.11g only: For increased speed in your network, enable this option. 802.11b
Radio Wave: Select ON or OFF.
D-Link Systems, Inc.
(Delivery Traffic Indication Message) - Select a setting between 1and
DTIM:
255. 1 is the default setting. DTIM is a countdown informing clients of
the next window for listening to broadcast and multicast messages.
The fragmentation threshold, which is specified in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346
byte setting will be fragmented before transmission. 2346 is the
default setting
This value should remain at its default setting of 2346. If you
encounter inconsistent data flow, only minor modifications to the
value range between 256 and 2346 are recommended
Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum
power.
increase end user application throughput in an 802.11g network.
Super G is backwards compatible to standard 802.11g devices. For
top performance, all wirelss devices on the network should be Super
G capable. Select either Disabled, Super G without Turbo, Super G
with Dynamic Turbo, or Super G with Static Turbo.
Disabled: Standard 802.11g support, no enhanced capabilities.
Super G
Capable of Packet Bursting, FastFrames, Compression,
without
and no Turbo mode.
Turbo:
Super
Capable of Packet Bursting, FastFrames, Compression,
G with
and Dynamic Turbo. This setting is backwards compatible
Dynamic
with non-Turbo (legacy) devices. Dynamic Turbo mode is
Turbo:
only enabled when all devices on the wireless network are
configured with Super G with Dynamic Turbo enabled.
Capable of Packet Bursting, FastFrames, Compression,
Super
G with
and Static Turbo. This setting is not backwards compatible
Static
with non-Turbo (legacy) devices. Static turbo mode is
Turbo:
always on and is only enabled when all the devices on the
wireless network are configured with Super G with Static
Turbo enabled.
devices will be excluded.
Using the Configuration Menu
25

Advertisement

Table of Contents
loading

Table of Contents