Basic Setup And Connections - Sanyo DS13330 Owner's Manual

BASIC SET-UP & CONNECTIONS
QuickTips
The TV will automati-
cally select the correct
Antenna mode for the
type of signal you
connect.
TV will switch off
automatically after 15
minutes if there is no
signal reception (cable
out or station not
broadcasting).
Exception—When the
Video mode is selected,
the TV will not automati-
cally switch off when
signal reception has
stopped for 15 minutes.
See page 6 for Remote
control operation.
If you move the TV to a
new location, press the
RESET key twice after
connecting the signal,
and turning on the TV.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
CATV FRANCHISE NOTE:
Cable companies, like public
utilities, are franchised by
local government authorities.
To receive cable programs,
even with equipment which
is capable of receiving cable
channels, the consumer
must subscribe to the cable
company's service.
4
INITIAL SET-UP
1. Install batteries in remote control, see page 6.
2. Connect signal, see below.
3. Plug in AC power cord.
4. Press POWER key to turn on TV.
5. Follow on-screen instructions.
CONNECTING CABLE SERVICE, OUTDOOR OR INDOOR ANTENNA,
OR SATELLITE DISH RECEIVER TO TV
Cable
Satellite Receiver
Service
CH3
CH4
Note: If you do not have a
VCR connect signal directly
to TV 75 ohm jack.
POSITIONING THE TV
Do not position the TV in a con-
fined area. Allow space for normal
air circulation around electronic
parts.
CATV IN
VIDEO L- AUDIO -R IN FROM
OUT TO TV S-VIDEO
SAT.
VIDEO L- AUDIO -R
IN
FROM ANT.
OUT
OUT TO TV
TV Back
Outdoor
Antenna
TV Back
VCR Back
UHF/VHF/CATV
75Ω
AS
Indoor
Antenna