Picture Tube Removal - Sony KV-20V50 Service Manual

2-3. PICTURE TUBE REMOVAL

REMOVAL OF ANODE-CAP
l
NOTE : Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT chield or carbon
painted on the CRT, after removing the anode.
REMOVING PROCEDURES
l
direction indicated by the arrow
HOW TO HANDLE AN ANODE-CAP
l
Don't hurt the surface of anode-caps with
sharp shaped material!
Don't press the rubber hardly not to hurt
inside of anode-caps!
A material fitting called as shatter-hook
terminal is built in the rubber.
Don't turn the foot of rubber over hardly!
The shatter-hook terminal will stick out or
hurt the rubber.
I
\
0
\
Cushion
Using a thumb pull up the rubber cap
firmly in the direction indicated by the
a r r o w @.
on spring
Deflection
separated from the anode button, the
anode-cap can be removed by turning up
the rubber cap and pulling up it in the
direction of the arrow
s c r e w s