Call Forwarding - Kyocera DuraForce User Manual

1. Enter a number on the dialpad and tap
Contacts).
2. Once you have established the connection, tap Add call, and dial the second number
(or place the call from Log or Contacts). This puts the first caller on hold and dials the
second number.
3. When you're connected to the second party, tap Merge calls. Your conference call is
now in session.
4. To end the conference call, tap
Note: If one of the parties you called hangs up during your call, you and the remaining party
stay connected. If you initiated the call and are the first to hang up, all parties are
disconnected.

Call Forwarding

Call Forwarding lets you forward all your incoming calls to another phone number – even when
your phone is turned off. You can continue to make calls from your phone when you have
activated Call Forwarding.
Note: You are charged a higher rate for calls you have forwarded.
To activate Call Forwarding:
1. Press > Phone > DIALPAD.
2. Enter
3. Enter the area code and phone number to which you want your calls forwarded.
4. Tap
5. Confirm the message and tap Forward Calls to forward your call or tap Cancel to
cancel forwarding.
To deactivate Call Forwarding:
1. Press > Phone > DIALPAD.
2. Enter
3. Tap
Phone Calls
. You will see the message if the call forwarding is activated.
.
.
(or place a call from Log or
.
.
34