Installing A Memory; Dimm Population Table - Gigabyte GA-7PESH3 User Manual

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR3 DIMMs on this motherboard.
Installation Step:
Step 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
Step 2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
Note: For dual-channel operation, DIMMs must be installed in matched pairs.
Step 3. Reverse the installation steps when you wish to remove the DIMM module.

1-4-3 DIMM Population Table

R-DIMM
2
1N or 2N DIMM0
1N Single-Rank
1N Dual-Rank
1N Quad-Rank
1
2
U-DIMM
- 17 -
1N or 2N DIMM0
1N Single-Rank
1N Dual-Rank
Hardware Installation