Disassembly Procedure - Yamaha SLG-100N Service Manual

QQ
3 7 63 1515 0

DISASSEMBLY PROCEDURE

Preparations
Make the following preparations;
Turn off the power switch.
Remove the battery cover and battery.
1. Left Frame
(Time required: About 2 minutes)
1-1 Loosen the adjusting bolt (front) marked [E15] and the adjusting
bolt (rear) marked [E16]. The left frame can then be removed.
(Fig.1)
2. Bracket Assembly, Bracket, Sleeve
(Time required: About 5 minutes each)
2-1 Remove the left frame. (See procedure 1.)
2-2 Bracket Assembly:
Remove the two (2) screws marked [D05]. The upper bracket
assembly can then be removed from the left frame. (Fig.1)
The lower bracket assembly can be removed in the same manner.
2-3 Bracket, Sleeve:
Remove the two (2) screws marked [E19]. The upper bracket
and the upper sleeve can then be removed. (Fig.1)
The lower bracket and the lower sleeve can be removed in the
same manner.
3. Right Frame
3-1 Remove the four (4) screws marked [E22]. The right frame can
then be removed with the horn. (Fig.1)
TE
4. Horn, Right Bracket
L 13942296513
4-1 Remove the right frame. (See procedure 3.)
4-2 Horn:
Remove the two (2) screws marked [D08]. The horn can then be
removed. (Fig.1)
4-3 Right Bracket:
Remove the two (2) screws marked [E21]. The upper right
bracket can then be removed. (Fig.1)
The lower right bracket can be removed in the same manner.
Peg
Bracket
Bracket assembly
[E19]
Sleeve
[D05]
Left frame
Bracket assembly
www
[E19]
[D05]
.
Bracket
http://www.xiaoyu163.com
(Time required: About 2 minutes)
(Time required: About 5 minutes each)
Peg
String
Panel holder assembly
[E15]
[E22]
[E21]
Right bracket
[D08]
x ao
y
Right bracket
i
[E21]
Sleeve
[E16]
[E22]
http://www.xiaoyu163.com
8
Q Q
3 6 7 1 3
[F02] X 4
[D05]: Flat Head Tapping Screw-2
Panel holder
3.0X8 (QC667000)
[D08]: Flat Head Tapping Screw
Spacer
3.5X20 (QC667100)
[E15]: Adjusting Bolt, Front
PUP
M6.0XP1X25 (QC653400)
Pickup
[E16]: Adjusting Bolt, Rear
M6.0XP1X12 (QC653500)
[E19]: Flat Head Tapping Screw
3.0X14 ZMC2BL (QC699200)
Horn
[E21]: Flat Head Tapping Screw
3.0X14 ZMC2BL (QC699200)
u163
[E22]: Flat Head Tapping Screw-2
3.0X8 (QC667000)
.
[F02]: Bind Head Tapping Screw-1
Right frame
3.0X10 ZMC2BL (20404200)
Fig.1
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
SLG-100N
9 9
2 8 9 9
7