Advertisement
2. QUICK DEMO
The Quick Demo is a way to get a customer interested in a product in less than
60 seconds.
Before You Start
1. Connect the MONO (L) Gt. AMP output of the ME-70 to the clean channel
of a good amp, such as a Roland JC-120 or other pro quality amp.
NOTE: It is very important to use a pro-quality guitar amp. Why run a high-
end effect through a low-end amp?
2. Set the amp's tone controls for a flat response.
3. Connect the ME-70 to power using a BOSS PSA-120S AC Adaptor.
4. Plug a guitar into the GUITAR INPUT of the ME-70.
5. Make sure the ME-70 is in MANUAL MODE.
6. Turn all ME-70 effects off.
THE QUICK DEMO: USING THE ME-70
This Quick Demo has five steps. You can do some or all of the steps.
STEP ONE: Add Distortion
1. Make sure that all the effects are off; then play the guitar through the ME-
70 to show the dry sound.
2. Select a DISTORTION or OVERDRIVE type by rotating the
OVERDRIVE/DISTORTION TYPE KNOB.
BOSS ME-70 Training Guide
Hide quick links:
Advertisement
