Advertisement
Functions
Function diagram
Temperature sensor
Operating modes
Automatic mode
Comfort mode
Energy Saving
mode
Frost Protection
2/8
Siemens
Building Technologies
The controller acquires the room temperature with its integrated sensor.
Q14
L1
ON
W
OFF
SD
The RDJ10 provides room temperature control only.
The RDJ10 provides the following modes: Automatic, Comfort, Energy Saving and
Frost Protection.
Changeover between the operating modes is made by moving the operating mode
slider to the respective position.
When Automatic mode is active, symbol
The RDJ10 operates according to the selected 24-hour time program.
When Comfort mode is active, symbol
The RDJ10 controls to the temperature setpoint adjusted at
This setpoint can be readjusted by setting the programming slider to
When Energy Saving mode is active, symbol
The RDJ10 controls to the temperature setpoint adjusted at
This setpoint can be readjusted by setting the programming slider to
When Frost Protection is active, symbol
The RDJ10 controls to the fixed temperature setpoint for frost protection.
Room temperature controllers
T
Room temperature
SD
Switching differential
W
Room temperature setpoint
L1
Output signal for heating
T[°C]
appears on the display.
appears on the display.
appears on the display.
.
.
appears on the display.
.
.
.
.
.
CE1N3071en
19.11.2007
Advertisement
