Advertisement
5. After 30 minutes of vibration therapy at the intensity you
set, Relaxis will automatically decrease intensity over an
additional 5 minutes. At the end of the 35-minute cycle,
Relaxis will shut itself off.
6. If you have not fallen asleep at the end of a 35-minute
cycle, you may press the Power Button again to initiate
a second cycle.
7. To stop therapy at any time, press the Power Button.
CARE AND CLEANING
Maximize the life of Relaxis through proper care and cleaning.
For full details and instructions on how to care for and clean
Relaxis, read your Relaxis Operation Manual.
To Clean Relaxis:
1. Unplug Relaxis from the outlet and disconnect the
power supply from the controller.
2. Remove the outer cotton cover and hand or machine
wash (inside out) in cold water with like colors.
Dry (inside out) on low or line dry.
3. Wipe the controller and pad surfaces with a slightly dampened (water only) cloth. Do not use cleaning
solutions on Relaxis. (These could damage the system surfaces.)
© 2014
P/N 08-0055-01_A
|
Sensory Medical, Inc.
www.myrelaxis.com
|
1235 Puerta del Sol #600
|
Tel: 888-4-RLS-HELP
Fax: 949-492-0650
On/Off Power Button
Line Power Light
Figure 2: User controls and lights
San Clemente, CA 92673
Increase Intensity
Button
Intensity Indicator
Lights
Decrease Intensity
Button
Fault Light
Page 2 of 2
Advertisement
