Page 7
Figure 2: Packaged system Controller Power Supply Figure 3: Connecting the power supply to the controller Patent No. 9,017,273...
Page 8
On/Off Power Button Increase Intensity Button Intensity Indicator Lights Decrease Intensity Button Line Power Fault Light Light Figure 4: User controls and lights Line Fault Power Light Light Figure 5: Lights at the bottom of controller Figure 6: Pad position example for sleeping on your back Patent No.
Page 9
Figure 7: Pad position example for sleeping on your side Increase Intensity Button Intensity Indicator Lights Decrease Intensity Button Figure 8: Controls for adjusting vibration intensity Patent No. 9,017,273...
Page 10
1. Make sure the power supply is plugged securely Light does not turn on) into both the controller and the wall outlet. 2. Confirm that you are using the power supply provided with your Relaxis. 3. Confirm that you are using a “live” outlet. 4. Push the Power Button to turn on the system. 1. Push the Power Button to turn off the system.
Page 11
Problem Possible Solution 4. Relaxis shuts off before the 1. Check that the power supply is plugged end of the 35-minute securely into the controller and the wall outlet. therapy cycle 2. Confirm that you are using the power supply provided with your Relaxis. 3. Push the Power Button to turn on the system.
Page 14
70° C Temperature limits for and storage. transport and storage. -25° C Relaxis IP rating. An ingress Power supply ingress protection rating of 22 indicates the pad (IP) rating. An ingress rating of and controller enclosures are 40 indicates the power supply...
Need help?
Do you have a question about the 09-0020-01 and is the answer not in the manual?
Questions and answers