Version - D-Link DSM-320 Manual

Setup (continued)

Version

Automatically check for firmware
update: Firmware updates are
system software updates that
correct known issues and add new
features to your DSM-320. If Yes
is selected, your DSM-320 will
check the Internet periodically to
locate available firmware updates.
If a firmware update is located, you
will be prompted to update.
Check for Updates: Press ENTER on the remote control when this option is
highlighted to check for firmware updates immediately. If a firmware update is
located, you will be prompted to update. IMPORTANT: DO NOT TURN OFF
THE UNIT OR DISCONNECT THE POWER DURING THE FIRMWARE
UPDATE. Once the update has been completed the DSM-320 will restart.
Some firmware updates may display a message telling you to upgrade
your version of the D-Link Media Server software. Your current version of
the software should still work, but to utilize all of the latest firmware features,
you should upgrade your Media Server software.
Please visit http://support.dlink.com for the latest version of the Media
Server software.
Note: If you have a version of the D-Link Media Server already installed
on your system, please uninstall the software and restart your system
before installing a newer version of the D-Link Media Server software.
88
1.05